CMS-10
CAMERA
STEREO
SHOTGUN

Compact Stereo Camera Mic for Highest-quality HDTV Audio

The Sanken CMS-10, the world’s first camera-mount Stereo Shotgun microphone, was developed in conjunction with NHK for HDTV broadcasting of the Nagano Winter Olympics. Since its world debut, it has become the new industry-wide standard microphone for use with HD cameras. While compact and lightweight, the CMS-10 provides extremely high-resolution audio to match today’s advanced picture quality.

The CMS-10, uses M-S design to provide stereo or mono with superior frontal directionality and a rejection of sounds from the sides and back, making it ideal for noisy shooting situations or reverberant environments. The built-in Mono/Stereo switch allows output of a highly directional mono signal to both L/R channels or a L/R stereo signal.

CMS-10 shown with attached XLR cable and included SH-10 Suspension Mount

CMS-10

Industry Standard Switchable Mono/Stereo Camera Mounted Shotgun

The CMS-10, uses M-S design to provide stereo or mono with superior frontal directionality and a rejec-tion of sounds from the sides and back, making it ideal for noisy shooting situations or reverberant environments. The built-in Mono/Stereo switch allows output of a highly directional mono signal to both L/R channels or a L/R stereo signal. (The CMS-10 is also available in an MS version that has a built-in Mono/M-S Stereo Switch.) The supplied suspension camera-mount eliminates vibrations from both camera and operator movement. The condenser elements use exclusive PPS (Poly-Phenylene Sulfide) diaphragms to provide exceptional response and optimum humidity/temperature stability.

Unlike conventional shotgun microphones, the CMS-10 uses a unique second-order pressure gra-dient design, enabling precision directional response through multiple cardioid elements in a front-back array. The capsules combine line micro-phone performance and second-order gradient response in a single compact [8.6 inch long] system.

For episodic television, film/video documentaries, and major broadcast events, it has become desirable to record targeted sounds precisely, with the added option of capturing realistic stereophonic perspectives. In many cases, engineers have accomplished this with a pair of shotgun micro-phones, or with the combination of a shotgun mic and an MS-stereo mic. Both methods are lacking because of problems in stereo localization, accu-rate width of the sonic image and clarity of the audio. In addition, multiple microphone configura-tions impair field mobility and sonic consistency.

Stereophonic localization depends primarily on signal accuracy and channel separation in the 400Hz to 3kHz range. Pattern control of the CMS-10 has been optimized in this range. Very low and very high frequency response has been optimized along the frontal axis so that the “target” on-axis sounds are clearly delineated. The result in play-back accentuates the frontal image, with side signals positioned slightly behind.

  • Mid-Side design
  • Switchable mono or left/right output
  • Matrix built in
  • Optimized pattern
  • Low proximity effect
  • Compact size 8.3″ (211mm), 6 oz (170g)
  • Wide – Attached 10″ (.26m) cable with standard XLR5 connector
  • Using PPS diaphragms, it maintains high durability and quality even in high humidity environments
CMS-10

SPECIFICATIONS

Model Name

CMS-10

Transducer

DC biased condenser

Directivity

MID: Narrow angle hyper cardioid
SIDE: Figure eight

Frequency response

150Hz – 20kHz

Sensitivity (at 1kHz)

STEREO 50mV/Pa ( -26dB,0dB=1V/Pa)
MONO 32mV/Pa ( -30dB,0dB=1V/Pa)

Equivalent noise level (A weighted)

STEREO: 20dB(A weighted)
MONO: 22dB(A weighted)

Max SPL (1% THD, at 1kHz)

≥120dB SPL

Output impedance( 1kHz )

240 ohms

Powering

+48±4V phantom X 2ch

Current consumption

less than 4mA

Weight

6 oz (170 g)

Dimensions

211mm X 27.8mm (8.3″ x 1.1″) (mesh part diameter)
26.5mm (1″) (suspension cylinder diameter)
19mm (.75″) (grip diameter)

Surface finish

Lusterless black soft touch coating

Connector

Cable direct out from the microphone, cable length 0.26m, connector XLR-5M. Connectable to “front” mic-input of most HD-camcorders stereo Mic-In
Phantom feed to 2 & 3, 4 & 5
XLR-5M
1: GND  2: Lch +  3: Lch –
4: Rch +  5: Rch –

POLAR PATTERN
CMS-10 Polar Pattern Mono
CMS-10 Polar Pattern Stereo Left Channel
FREQUENCY RESPONSE
CMS-10 Frequency Response

ACCESSORIES

Included Accessories:
Optional Accessories: